Rwy12 ObjectPlacer v1.2 Libraries Installation ============================================== 1. Version 1.2 ============== This version includes the program and all 39 libraries published so far. The download is divided into 4 zip files because of the total size; rwy12_Program_v1.2.zip – the program with documentation rwy12_Lib1_v1.2.zip – object libraries part 1 rwy12_Lib2_v1.2.zip – object libraries part 2 rwy12_Lib3_v1.2.zip – object libraries part 3 Many members of our community don’t have yet a broad band connection so the maximum size of one zip file should not be higher than 50 mb. Anyway, to enjoy the full capacity of Rwy12, you have to download and install all 4 files. You will find in the Libraries txt Files folder of each library zip file the txt files that came originally with each library download. You can use these files in case something is not clear to you about a certain library or object. You can also find there the e-mail of the authors. 2. Installation =============== Rwy12 Object Placer Library Installation for Those who already have Rwy12; ========================================================================= The download has 39 object libraries in 3 zip files. You must install all of them in order to make Rwy12 work properly. #1 library is the basic library and #2 and #3 are additions that will be installed differently. Download the 3 library zip files and unzip them to any temp folder (except in FS9). Once unzip, please do the following; 1. Delete your old Static Objects Library folder (back it up if you feel better that way) which is probably located here (or on a different drive, where your flight simulator may reside): C:\Program Files\Microsoft Games\Flight Simulator 9\Addon Scenery\Static Objects Library. 2. rwy12_lib1_v1.2 - Copy the entire Static Objects Library folder to C:\Program Files\Microsoft Games\Flight Simulator 9\Addon Scenery. (C:\ is the drive where you have your FS9. If different – change the paste target). Keep documentation, if any, somewhere else. 3. rwy12_lib2_v1.2 – copy only the Scenery files and Texture files (not the folders) into the newly created Microsoft Games\Flight Simulator 9\Addon Scenery\Scenery (and into Files\Microsoft Games\Flight Simulator 9\Addon Scenery\Texture). You may be asked to overwrite some texture files, Please do so. 4. rwy12_lib3_v1.2 – same as 2 above. Keep documentation, if any, somewhere else. 5. Assuming you have installed the program itself and the third party programs, according to the instruction in the program download and your Object Placer Library is activated as a new scenery in FS9 (see installation instructions in the Program download), you are ready now to use Rwy12. Rwy12 Object Placer Library Installation for New Users of Rwy12; ================================================================= The download has 39 object libraries in 3 zip files. You must install all of them in order to make Rwy12 work properly. #1 library is the basic library and #2 and #3 are additions that will be installed differently. Download the 3 library zip files and unzip them to any temp folder (except in FS9). Once unzip, please do the following; 1. rwy12_lib1_v1.2 - Copy the entire Static Objects Library folder to C:\Program Files\Microsoft Games\Flight Simulator 9\Addon Scenery. (C:\ is the drive where you have your FS9. If different – change the paste target). Keep documentation, if any, somewhere else. 2. rwy12_lib2_v1.2 – copy only the Scenery files and Texture files (not the folders) into the newly created Microsoft Games\Flight Simulator 9\Addon Scenery\Scenery (and into Files\Microsoft Games\Flight Simulator 9\Addon Scenery\Texture). You may be asked to overwrite some texture files, Please do so. 3. rwy12_lib3_v1.2 – same as 2 above. Keep documentation, if any, somewhere else. 4. Assuming you have installed the program itself and the third party programs, according to the instruction in the program download and activated Object Placer Library as a new scenery in FS9 (see installation instructions in the Program download), you are ready now to use Rwy12. 3. Un-Installation of Rwy12 Libraries ===================================== Open FS2004 and go to Setting\Scenery Library\Delete Area , and delete the Static Objects Library Delete all files created in (X):\Program Files\Microsoft Games\Flight Simulator 9\addon scenery\scenery and \texture. 5. Copyrights and Acknowlegments ================================ (c) 2004 ObjectPlacer and libraries by Seev Kahn are copyright of Israel Roth and Seev Kahn - Rwy12 1.The ObjectPlacer program and attached files are FREEWARE and it is forbidden to make them part of any commercial package or activity, without the content of the authors (us and others, if they stated so in their upload) 2.We can be contacted by e-mail zeevkahn@hotmail.com and israel_roth@hotmail.com or via our web site, which also have an active forum; http://www.rwy12.com/ We can not promise technical assistance on a regular basis, but we will be happy to get some feedback. 3.There is no warranty either express or implied covering this product. 4.Acknowledgments and thanks: Special thanks go to Pete Dowson who allowed us to use his FSUIPC program, which establishes the link between FS 2004 and Object Placer. This program is a keystone for FS users and has much more in it over what we used. We included, in the Documentation folder of Rwy12, the User Guide of FSUIPC ver 3.40 (in PDF format) for your convenience so you can learn more about this utility. To Discreet for making the freeware gmax program To Lee Swordy for his AFCAD program, To all the authors and additional contributors of libraries (more about co-workers’ names who worked with the creators of the libraries can be seen in the txt files of each library). A full list of credits can be found in the PDF and Word files When you first open your Rwy12 program (double click on the icon) you will see all 39 libraries in the drop down menu and in each of them all the objects (with picture) plus the author's name; Israel Roth and Seev Kahn http://www.rwy12.com/ Aug. 2005